This trim will be cut and finished per your specifications. Exposed face of cut raw foam shape will be wrapped with netting which in combination with acrylic polymer modified cement basecoat provides a hard shell over a foam core shape. Foam contains no formaldehyde, no HCFC’s, no thermal drift, and is non-corrosive. Benefits of foam trim over wood trim are that it will never change its shape (twist, warp, split etc.), it will never rot, minimal to none maintenance, it will not get destroyed by termites, limitless and attractive forms of design and ease of installation and repair. It is ready to install.
Finish (Texture):
Medium Sand Finish - #30 sand is used in the basecoat. Product is ready to install. Only one coat of basecoat is applied over netting, color coat application is highly recommended.
Smooth Finish - #30 sand is used in the first basecoat application, #60 sand is used in the second basecoat application. 2 coats of basecoat is applied over netting, color coat application is not required and trim is ready to be primed and painted with exterior grade latex paint. Take care in handling products with this finish, occasional hairline cracking is normal and will not affect the product.
Color Coat - #16 / #20 sand is used in the basecoat. Product is color coated with acrylic based flexible finish with #20 sand, colored per your selection. Total of 2 coats is applied. It will arrive ready to install. No action is needed upon completion of installation. Take care in handling products with this finish, occasional hairline cracking is normal and will not affect the product.
*Color:
Due to the limitations of desktop scanners and the relative inconsistencies of various display monitors, the colors you see on your screen may not be a totally accurate reproduction of the actual product. We strive to make our colors as accurate as possible, but screen images are intended as a guide only and should not be regarded as absolutely correct. If you would like to see a sample of any product shown on our site, please call Customer Service at (877) 230-8746. It may take us some time to prepare and send a live color sample to you. There may be a shipping charge.
Invicta Foam Products, LLC (IFP) warrants its products to be of merchantable quality and suitable for the general purpose for which they were intended, when applied in accordance with IFP instructions. IFP do not warrant its products to be suitable for any purpose or use other than for which they were intended. Liability under this warranty is limited to supplying new material without charge, or at IFP option, to a refund of the purchase price. In the event of a claim under this warranty, written notice must be given at the address shown below. Occasional efflorescence and hairline cracking is normal and will not be covered under this warranty. This limited warranty is issued and accepted in lieu of all other expressed warranties, and expressly excludes liability for consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Invicta Foam Products LLC, P.O. Box 2440, West Sacramento, CA 95691, Att: Warranty
Do not expose uncoated foam side of material to sunlight.
Foam products should not be stored in extreme heat.
All products should be placed and stored flat and if need to stack make sure at least 80% of the product is supported from the bottom. Do not stack anything on top of the product.
Storage in humid (not wet) environment will not affect the product but may cause or increase efflorescence.
DO NOT BEND shapes as they may break and crack.